全瓷冠断裂失效行为的断口形貌分析(5)
【作者】网站采编
【关键词】
【摘要】[12] NAWAFLEH N,HATAMLEH MM,OCHSNER A,et al.The Impact of Core/Veneer Thickness Ratio and Cyclic Loading on Fracture Resistance of Lithium Disilicate Crown.J ;27(1):75-82. [13] FIGUEIREDO VMGD,PEREIRA
[12] NAWAFLEH N,HATAMLEH MM,OCHSNER A,et al.The Impact of Core/Veneer Thickness Ratio and Cyclic Loading on Fracture Resistance of Lithium Disilicate Crown.J ;27(1):75-82.
[13] FIGUEIREDO VMGD,PEREIRA SMB,BRESSIANI E,et of porcelain thickness on the flexural strength and crack propagation in a bilayered zirconia system.J Appl Oral Sci.2017;25(5):566-574.
[14] FLEMING G,DICKENS M,THOMAS L,et al.The in vitro failure of allceramic crowns and the connector area of fixed partial dentures using bilayered ceramic specimens:The influence of core to dentin thickness ;22(8):771-777.
[15] KIM J,DHITAL S,ZHIVAGO P,et finite element analysis of residual stresses in porcelain-veneered zirconia dental crowns.J Mech Behav Biomed ;82:202-209.
[16] ZHANG Z,ZHOU S,LI Q,et analysis of bi-layered ceramic dental ;28(2):e6-e14.
[17] WENDLER M,BELLI R,LOHBAUER influencing development of residual stresses during crystallization firing in a novel lithium silicate ;35(6):871-882.
[18] LOHBAUER U,WENDLER M,RAPP D,et analysis of lithium silicate crown failures during Open Med Case Rep.2019;7:X-X.
[19] SCHERRER SS,LOHBAUER U,DELLA BONA A,et al.ADM guidance—Ceramics:guidance to the use of fractography in failure analysis of brittle ;33(6):599-620.
[20] PANG Z,CHUGHTAI A,SAILER I,et al.A fractographic study of clinically retrieved zirconia-ceramic and metal-ceramic fixed dental ;31(10):1198-1206.
[21] ?ILO M,QUINN origins in twenty-two dental alumina crowns.J Mech Behav Biomed ;53:93-103.
[22] MORAGUEZ OD,WISKOTT HW,SCHERRER nine-year survival estimates and fracture mechanisms of zirconia-and aluminabased restorations using standardized criteria to distinguish the severity of ceramic Oral ;19(9):2295-2307.
[23] KRUMMEL A,GARLING A,SASSE M,et of bonding surface and bonding methods on the fracture resistance and survival rate of full-coverage occlusal veneers made from lithium disilicate ceramic after cyclic ;35(10):1351-1359.
[24] PRADIES G,GODOY-RUIZ L,OZCAN M,et of Surface Roughness,Fracture Toughness,and Weibull Characteristics of Different Framework-Veneer Dental Ceramic Assemblies after Grinding,Polishing,and ;28(1):e216-e221.
文章来源:《材料保护》 网址: http://www.clbhzzs.cn/qikandaodu/2021/0622/856.html
上一篇:乡村里的美食
下一篇:靶向性氧化石墨烯白术内酯对卵巢癌细胞凋亡及